Veratron Ammeter Shunt -60/60AMP - 60mV Input - 12/24V Busbars Amperage: 40A

Amperage: 40A

Used where positive and negative supplies must be isolated at the same time

Transom Mount Bracket for CPT-DV & CPT-DVS

Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power

Veratron Ammeter Shunt -60/60AMP - 60mV Input - 12/24V Busbars Amperage: 40AAmmeter Shunt 60 60AMP 60mV Input 12 24V A shunt is a resistor that causes a small voltage drop. This voltage drop in mVolt is proportional with the current in ampere that goes through the resistor. This voltage is measured by the Ammeter. The advantage of the shunt is that thick wires are no longer needed at a high current (>10 A). To measure the total flow you only need two thin wires from the measuring instrument to the shunt in the earth