REDARC BMS Load Disconnect Isolator (SBI12-BLD) Wheel Accessories 2 to 1 splitter cable

2 to 1 splitter cable allows the connection of two Surface RGB rock lights using one of our wiring harnesses

Toyota FJ Cruiser (2007-2014)

Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers

also hangable with carabiner

REDARC BMS Load Disconnect Isolator (SBI12-BLD) Wheel Accessories 2 to 1 splitter cableThe SBI12 BLD is used in conjunction with a REDARC Manager30 Battery Management System (BMS) to protect the auxiliary battery from excessive discharge. Specifically designed for use as the load disconnect solenoid controlled by the BMS, the black (earth wire) should be connected to the load pin of the BMS. The BMS sets the turn on and turn off points through its settings and switches this black wire (earth when loads should be on, no earth when loads